Update of V100R010C10SPC200 Compared with V100R010C00SPC200

Hardware Name Update Type Description
TN97MD2 New The TN97MD2 board is a multiplexer and demultiplexer board that supports extended C band. It can be used to multiplex the wavelengths of the new site and existing site during submarine expansion, construct the COTDR detection channel, or form a terrestrial regeneration site with OAs and provide the COTDR loopback channel.
TN97M48V New As a type of optical multiplexing unit, the M48V board multiplexes a maximum of 48 extended C channels of signals into one channel of signals that comply with ITU-T Recommendations, and adjusts the input optical power of each channel.
TN97D48 New As a type of optical demultiplexing unit, The D48 board implements the demultiplexing of one optical signal into a maximum of 48 ITU-T Recommendation-compliant WDM signals.
TN97FIU New As an optical multiplexing and demultiplexing unit, the TN97FIU board is used in the extended spans of the submarine system on land, and multiplexes the main channel (service channel) signal and the OSC signal onto a single communications channel. The TN97FIU board also performs the reverse process. In addition, the TN97FIU board supports high power input when works with the TN97HBA board.
TN97ITL New As a type of optical multiplexing and demultiplexing unit, the TN97ITL board implements multiplexing/demultiplexing between the extended C-band optical signals at a channel spacing of 100 GHz and the signals at a channel spacing of 50 GHz.
TN97TD20 New The TN97TD20 board applies to a SLTE site to broadcast a multi-wavelength signal that contains 20 coherent wavelength signals to 20 coherent line boards. Because coherent line boards support automatic wavelength selection, the coherent line boards automatically select the required signal from the multi-wavelength signal, offering colorless applications.
TN97TM20 New The TN97TM20 board is a multiplexer board and is intended for colorless applications. It is used to add 20 coherent optical signals over different wavelengths and multiplex these signals into one multi-wavelength signal. It supports C-band and extended band wavelengths and flexible grid wavelength signals.
TN97ASE New The TN97ASE board is optical amplifier board with amplified spontaneous emission. It applies to the submarine system to generate extended C-band dummy light. In addition, it supports pump redundancy protection function.
TN97OBU2 New The TN97OBU2 board is optical amplifier board. It applies to the submarine system to support optical power amplification of the extended C-band and pump redundancy protection function. It also supports the gain locking, power locking, and APC modes.
TN97OAU2 New The TN97OAU2 board is a gain-adjustable optical amplifier board. It applies to the submarine system to support optical power amplification of the extended C-band and pump redundancy protection. It supports the gain locking, power locking, and APC modes.
TN97RPC New The TN97RPC board is an OA board. It can produce multi-wavelength backward pump light with high power and achieve the distributed in-service amplification of signals within the entire bandwidth of the extended C-band while producing very little noise.
TN12RAU1 New Added the TN12RAU106E board.
TN12RAU2 New Added the TN12RAU201E board.
TNK3STG New Added the TNK3STG board.
TN13STG New Added the TN13STG board.
TN15TM20 New Added the TN15TM20 board which supports flexible grid wavelength signals.
TN11OLSP New s optical protection boards, It supports 1:1 optical transmission section (OTS) optical line protection.
TN11OLSPA/TN11OLSPB New TN11OLSPA and TN11OLSPB boards are optical protection boards and must be used in pairs. They support 1:1 OTS optical line protection. In addition, they can work together with the SFIU board on an optical regeneration site and support the IEEE 1588v2 application scenario.
TN51RPC New The TN51RPC board is an OA board. It can produce multi-wavelength forward pump light with high power and achieve the distributed in-service amplification of signals within the entire bandwidth of the C-band and extended C-band while producing very little noise.
TN51ROP New C-band and extended C-band Remote optical pump processing Board.
TN51HBA New Compared with the TN11HBA board, the TN51HBA board can amplifie the power of Extend C-band optical signals. The TN51HBA board occupies two slots and consumes less power.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s